Table of Contents
Advertisement
The image is displaced in one direction.
Read the instructions on the link
select the correct resolution, refresh rate and make adjustments based on these instructions.
Faint shadow from the static image displayed is visible on the screen.
• Activate the power management function to let your computer and monitor go into a low
power "sleep" mode when not actively in use.
• Use a screensaver to prevent the occurrence of image retention.
Power LED indicator
The LED indicator is solid white or flashing white.
• If the LED lights up in solid white, the monitor is powered on.
• If the LED is illuminated in white and there is a message
means you are using a display mode that this monitor does not support, please change the
setting to one of the supported mode. Please read the
from the link
"Adjusting the Screen Resolution"
• If the LED is illuminated in flashing white, the power management mode is active. Press any
button on the computer keyboard or move the mouse. If that does not help, check the signal
cable connectors. If any pin is bent or broken off, please contact your dealer to get necessary
support.
• If the LED is off, check the power supply mains socket, the external power supply and the
mains switch.
OSD controls
The OSD controls are inaccessible.
To unlock the OSD controls when it is preset to be locked, press and hold any key for 10
seconds.
OSD messages
A message
Out of Range
If there is a message
means computer compatibility caused by operating system or graphic card. The system will
adjust the refresh rate automatically. Just wait until the operating system is launched.
Audio
No sound can be heard from the built-in speakers. (selected models only)
• Check whether the desired cable to input audio signals is properly connected. See
the audio cable. on page 12
• Increase the volume (volume may be muted or too low).
• Remove your headphone and/or external speakers. (If they are connected to the monitor,
the built-in speakers are automatically muted.)
"Adjusting the Screen Resolution"
on the screen during computer boot up process.
on the screen during computer boot up process, this
Out of Range
for details.
on the CD, and then
on the screen, this
Out of Range
"Preset display modes"
.
section
Connect
Troubleshooting
51
Hide quick links:
Advertisement
Table of Contents
