BenQ SW240 User Manual page 13

Connect USB devices via other USB ports
(downstream) on the monitor. These downstream USB
ports transmit data between connected USB devices
and the upstream port.
5. Connect the memory card.
Insert an SD or MMC memory card following the
direction indicated on the card to exchange files.
Supported memory card formats are as follows:
•SD / SDHC / SDXC
•MMC
6. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
7. Organize the cables.
Route the cables via the cable management hole.
8. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
How to assemble your monitor hardware 13