Ricoh Aficio 551 Copy Reference Manual page 208

Copying
E Enter the horizontal size of the stamp with the number keys, then press
the [#] key.
2
Note
To change the value entered, press the [Clear] or {Clear/Stop} key and en-
ter the new value.
You can enter sizes within 10 – 432mm, 1.0" – 17.0" horizontal, and 10 –
297mm, 1.0" – 11.7" vertical. However, if the value exceeds the maxi-
mum value of the area (5,000mm
range of the area automatically.
F Press the [Vertical] key, and enter the vertical size in the same way as step
E.
G Set the user stamp on the exposure glass, and then press the [Scan Start]
key.
Note
Do not set the original in the document feeder.
The machine scans the original three times. Do not lift the document
feeder until the main menu of the Copy features appears.
If you press the [Exit] key, the main menu of the Copy features appears
with nothing programmed.
H Press the [Exit] key.
192
2 2
, 7.75 inch ), it is corrected within the