Staple - Ricoh Aficio 350e Copy Reference Manual

Copying
C After all originals are scanned,
press the {#} key.
The copies are delivered to the
tray.
When setting a stack of originals
in the document feeder in SADF
2
mode
Reference
P.31 "SADF mode"
A Set an original in the document
feeder, then press the {Start}
key.
Note
Start with the first page to be
copied.
B Set the next original.
C After all originals are scanned,
press the {#} key.
The copies are delivered to the
tray.

Staple

The optional finisher is required to use
this function.
Each copy set can be stapled together.
46
Limitation
You cannot use the following pa-
per in this function:
• Post cards
• Translucent paper
• OHP transparencies
• Adhesive labels
• Curled paper
• Low stiffness paper
• Paper of different sizes
Note
For this mode, the following limi-
tation applies. When the number
of copies exceeds the tray capacity,
copying stops. In this case, remove
the copies from the shift tray and
then resume copying.
Metric version
1000-sheet
finisher
Paper A3L, B4L,
size A4KL,
B5K
Stapler • A4 or
capacity smaller:
30 sheets
(80g/m
• B4 or
larger: 20
sheets
(80g/m
Shift tray 1,000 sheets
capacity 2
(80g/m )
(A4K)
3000-sheet
finisher
A3L, B4L,
A4KL,
B5KL
• A4 or
smaller:
50 sheets
2 2
) (80g/m )
• B4 or
larger: 30
sheets
2 (80g/
)
2
m )(with-
out
punch)
3,000 sheets
2
(80g/m )