Table of Contents
Advertisement
Switching on DTC
function
Press and hold button 1 un-
til the DTC warning light 3
changes its display behavior.
DTC warning light goes
out; if self-diagnosis has
not been completed, it begins to
flash.
Release button 1 within two
seconds.
DTC warning light remains
off or continues to flash.
DTC function is switched on.
If the coding plug is not used
for the SLICK function, as an
alternative, the ignition can be
switched off, then on again.
If the DTC warning light
lights up after switching the
ignition off and on and then con-
tinued driving over 3 mph (5 km/
h), a DTC error has occurred.
Driving mode
Setting driving mode
Switch on ignition.
Press button 1.
Details on the selectable
driving modes are provided
in the chapter "Technology in
Detail".
The selection arrow 1 and the
selection menu 2 are displayed.
The current setting is shown at
position 3.
4
43
z
Advertisement
Table of Contents
