Lamps - BMW S 1000 RR 2010 Rider's Manual

9
128
Install the mounting pins
(2 152 841) 1 on the left
and right into the rear wheel
swinging arm with torque.
z
Adapter on rear wheel
swinging arm
15 lb/ft (20 Nm)
Turn in the bracket 2 with the
long sides facing the outside.
Adjust the mounting pieces 3
to the width of the pins
inserted into the rear wheel
swing arm.
Adjust the height of the aux-
iliary stand so that the rear
wheel is lifted slightly off the
ground.
Attach the auxiliary stand to the
rear wheel swinging arm and
press it on the ground evenly.

Lamps

General instructions
A warning appears in the multi-
function display if a bulb is defec-
tive. If the brake or rear light fails,
the symbol is accompanied by
the 'General' warning light, which
lights up yellow.
A defective bulb places
your safety at risk because
it is easier for other users to
oversee the motorcycle.