KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Cams For Mechanical Override Cylinder:
Cams, Cores, Cylinders and Blocking Rings
The KC9000 trim requires the use of a clover leaf cam (a). This
is a list of compatible Schlage parts. For other manufacturers,
consult cross-reference charts.
> Cam for Standard Mortise cylinder:
> Cam for Interchangeable Core:
IC Cores:
> Small Format IC core w/ cam:
NOTE: This core requires the use of 1/4" blocking ring:
> Full Size IC core w/ cam:
NOTE: This core requires the use of 3/8" blocking ring:
Cylinders / Blocking Rings:
The KC9000 can use a 1-1/8" mortise cylinder without the use
of a blocking ring. For cylinders longer than 1-1/8" a blocking
ring is required. The blocking ring thickness is equal to the cyl-
inder length, minus 1-1/8". For example, if you use a 1-1/2" cyl-
inder you need a 3/8" blocking ring. Compression rings can be
ordered from a Schlage distributor:
No compression ring:
57040-E
Cams, Cores, Cylinders and Blocking Rings
Schlage Everest:
Schlage Classic:
Schlage IC Cam:
Schlage:
80-108-<FINISH>
Schlage:
36-079-025-<FINISH>
Schlage:
30-016-<FINISH>
Schlage:
36-079-037-<FINISH>
Thickness:
Schlage Part Number:
1/8"
36-079-012-<FINISH>
1/4"
36-079-025-<FINISH>
3/8"
36-079-037-<FINISH>
1/2"
36-079-050-<FINISH>
Page 5
L583-153
L583-254
L583-255
a
04-2007