Advertisement
KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Introduction / Tools and Materials Needed / Contact Info
Introduction:
Introduction / Tools and Materials Needed / Contact Info
Tools and Materials Needed:
1. Flat head screwdriver w/straight, 1/8" wide blade.
2. Small Philips head screwdriver
3. 3/32" Allen wrench
4. 1/16" Allen wrench
5. Long nose needle-nose pliers
6. Center punch
7. Hammer
8. Pencil
9. Drill & Tap for 10-32 threads
Contact Information:
57040-E
The KC9111/KC9111-2 and KC9321/KC9321-2 are designed to replace existing
exterior trim on Adams Rite® deadlatches. The trim will retract the latch when an
access code or iButton is entered and the lever is depressed or the turnpiece is
turned. Mechanical key override is standard. The trim is compatible with any inte-
rior device such as a pushpaddle or Adams Rite® mortise exit device. When a
'toggle' code or iButton is entered the lever or turnpiece will be continuously
engaged allowing latched passage mode until a 'toggle' code or iButton is entered
again to relock trim. Audit Trail feature is available on the KC9111-2 & KC9321-2
The KC9111/KC9111-2 (trim w/lever & MS Hook interface) and the KC9321/
KC9321-2 (trim w/turnpiece & MS Hook interface) are both compatible with
Adams Rite® 4710 & 4730 deadlatch locks and 8400 Series mortise narrow
stile exit devices.
Schlage Lock Company
Forestville, CT 06010
technical support: 866-322-1237
fax: 866-322-1233
web: http://www.irsupport.net
575 Birch Street
Page 3
04-2007
Advertisement
