Advertisement
KC9111/KC9111-2 & KC9321/KC9321-2 INSTALLATION
Door Preparation
Door Preparation
Door Conditions:
Installation may require the use of a cover plate (a) to cover the holes left in the door.
If the KC9321/KC9321-2 (trim w/turnpiece) is used and the existing pull (b) must be
removed, Ives offers a compatible pull.
>Schlage Cover Plate P/N: KC9000-KRP
>Ives Pull P/N: 8190-18-xxx (xxx = finish)
Backset is determined by
the Adams Rite® lock.
For factory prepped doors, use dimensions
shown. Dimensions are referenced from cen-
ter of 1-1/4" cylinder hole. Backset is deter-
mined by the Adams Rite® lock.
When installing new Adams Rite® locks,
do not install outside cylinder (because this
trim replaces it) and do not install face plate at
this time because access to the cylinder set
screw in the lock will be required during
installation.
57040-E
Page 4
6-21/32"
(6.656")
3-31/32"
(3.962")
2-45/64"
(2.697")
04-2007
b
a
Advertisement
