Bb Base Block - YASKAWA GPD 505/P5 Troubleshooting Manual

Minor Fault
√ √
506 515
BB
Base Block
Possible Cause(s):
A baseblock command was accepted at the multi-function input
terminals 3, 4, 5, 6, 7, or 8.
Corrective Action:
Check for an external condition, verify the program parameters.
Fault Codes
- Operation continues and the digital operator indication blinks
The fault relay does not activate.
505
External baseblock command is input from the multi-
bb
function input terminals.
A minor fault contact output can be programmed by
using the multi-function outputs.
PP.P5G5.03.Troubleshoot
Page 33
Rev. 06/11/2003