Advertisement
Suboption "IP setting" for capture card IP setting:
192.168.8.60 is device IP;
8888 is Server port. This port is for communicating purpose, it's different from ts port.
Linux platform:
This capture card also supports Linux platform, Linux driver is ready. Linux OS, we recommend
you these command system like Ubuntu or centos, or Debain.
And for software, it's compatible with those DVB streaming software. For example, DVBlast,
Tvheadend, Astra cesbo, mumudvb, and ect.
Just take it as a DVBS/S2 tuner card, and also all of your configuration must follow DVBS/S2
standard, parameters include "Frequency", "Polarization", "Symbol rate", "Modulation", not one
less.
Now, we'll explain you how it works in a Linux platform.
1.Install your capture card to your Linux server.
2.Run this command to check whether device is detected by your Serevr or not:
$ lsusb or $ lsusb | grep 5301
Advertisement
