Advertisement
be set with auto,manual and advanced mode
#./TBSLocalConfigurationTool -K myhdmiTV
// set the device of video output program
name
#./TBSLocalConfigurationTool -A
// set the device of video output format auto mode, it means
the same to the input format
#./TBSLocalConfigurationTool -M 3 // set the device of video output format manual mode,
you can set from 1 to 7 match 1920*1080 to 480*272
#./TBSLocalConfigurationTool -p 1 -l 32 -H 1920 -V 1080 -B 5000 -F 30
// set the device of
video output format Advanced mode: main profile, level is 3.2, H is 1920, V is 1080, bitrate is 5M
and frameRate is 30 frames.
#./TBSLocalConfigurationTool -j 1 -r // set the device of program number 1
#./TBSLocalConfigurationTool -s 300,301,302,303 -r // set the device of pid pmt,prc,vpid,apid)
#./TBSLocalConfigurationTool -n 0 -o
// check the device of pid (pmt,prc,vpid,apid)
#./TBSLocalConfigurationTool -n 0 -b 0 -r //set audio output select, 1: from audio codec
#./TBSLocalConfigurationTool -f 0 -r// set audio frequency select, 0: 48k
#./TBSLocalConfigurationTool -w
//putout the information of audio
#./TBSLocalConfigurationTool -m 0 -t 192.168.8.100:8888 -E //Streaming to192.168.8.100:8888
by UDP;
#./TBSLocalConfigurationTool -Q tbs.ts -X //Record TS (no limit),TS file name is tbs.ts;
#./TBSLocalConfigurationTool -Q tbs.ts -G 10 //Record TS file's size is 10MB,TS file name is tbs.ts;
#./TBSLocalConfigurationTool -Q tbs.ts -Y 10 //Record TS file's time is 10 S,TS file name is tbs.t
#./TBSLocalConfigurationTool -d
// get the tool version
Notice:
For "command line" configure, once the configuration is done, please run this command to effect
your setting:
# ./TBSLocalConfigurationTool -r
For example, you want a
"Super" format, set it like this:
# ./TBSLocalConfigurationTool -M 1
# ./TBSLocalConfigurationTool -r
Or run:
# ./TBSLocalConfigurationTool -M 1 -r
Advertisement
