Advertisement
4>Go to "Device Manager", check whether driver is ready or not. If you can see as below,
A device "TBS5301 USB HDMI Capture" appears under "Sound, video and game controllers", that
means driver has been installed successfully, you can use it now:
2.The Usage
This device has USB and Ethernet interface, Media will be transferred by USB port or Ethernet
port, and the USB port is always the preferred.
If you choose Ethernet, please remove USB cable and restart device again (power off/on).
In this case, the way to get IP is DHCP.
Transfer media by USB:
1>This capture card is compatible with those DVB software, like DVBdream, DVBviewer, progDVB,
and etc. in Windows system.
2>Encoding setting:
The capture card encoding type is hardware compression, that means it will not cost you any CPU
resource. Please set a proper encoding parameter first. We have 3 modes for you: Auto, Manual,
Advanced.
Auto mode: The output resolution, code rate and frame rate will be identical to the input.
Manual mode: Super, Ultral, Excellent, Good, Fair, Poor, Mobile. A level is corresponding to a
resolution and a code rate.
Advanced mode: You can define the encoding parameter yourself.
3>Here's the setting tool:
Advertisement
