Advertisement
6>Streaming.
Our setting tool also support streaming in windows. If you want to do a streaming, just go to
setting tool "Streaming" option:
Network Protocol: UDP or RTP
Unicast/Multicast: where you want to stream to.
Port: streaming port
Start/Stop: start or stop "streaming".
Transfer by Enthernet:
In this case, just need to connect a LAN to this capture card. Please do not connect USB cable, if
USB have already connected, please remove it and restart your capture card (power off/on).
Setting tool is another one named TBSNetConfigurationTool.
1>"HDMI" option is for output setting,3 modes "Auto", "Manual" and "Advanced":
Advertisement
