Searching For A Destination - Pioneer AVIC-Z910DAB Operation Manual

• When the route is set:
Distance to final destination, time needed to reach the final destination and estimated
arrival time are shown.
• When the route is not set:
Direction or altitude is shown.
NOTES
• Touching and holding the field allows you to display the setting screen for the field. For details, refer
to page 29.
• The estimated time of arrival is an ideal value calculated based on the speed limit value set in [Max.
Speed] of vehicle type setting and the actual driving speed. The estimated time of arrival is only a
reference value, and does not guarantee arrival at that time. For details, refer to page 26.

Searching for a destination

Search for a destination or waypoint using the address or another method.
You can also set a destination by touching the map on the screen.
Once the destination is set, the system can start the navigation by touching [Start
Navigation] (page 18).
CAUTION
For safety reasons, these route-setting functions are not available while your vehicle is in motion. To
enable these functions, you must stop in a safe place and put on the handbrake.
14
En
NOTE
Some information regarding traffic regulations depends on the time when the route calculation is
performed. Thus, the information may not correspond with a certain traffic regulation when your
vehicle actually passes through the location in question. Also, the information on the traffic regulations
provided applies for a passenger vehicle, and not for a lorry or other delivery vehicles. Always follow
the actual traffic regulations when driving.
1
Press .
2
Touch .
3
Touch [New Route].
The following screen appears.
Suggests a destination based on your navigation habits, using
parameters such as current time of day, day of week and current
location.
Displays the previous or next page of the searching for a destination
menu.
Searches for a location by entering the specific address (page 15).
Searches for various facilities (Points Of Interest - POI) such as petrol
stations accommodations, etc. by selecting the category (page 15).
Selects a destination from the stored locations (page 16).
Searches for a location from the recently visited places (page 16).
Selects a destination from the stored routes (page 16).
Searches for a location by entering a latitude and longitude
(page 16).
Searches for a location using multiple factors (page 16).