Browsing The Data Field; Searching For A Destination; How To Plan Your Route - Pioneer AVIC-F980DAB Operation Manual

How to use the map
Signposts
Signs are displayed at the top of the map.
Junction view
If you are approaching a complex intersection, the map is
replaced with a 3D view of the junction.
p If the data for these items is not contained in the map data,
the information is not available even if there are signs on the
actual road.
When you set "Offer Motorway Services" to "on", the
appears while you are driving on motorways. Touch the icon
to open the details of the next few exits or service stations. In
addition, touch an item to show its location on the map. You can
set it as a waypoint easily.
14

Browsing the data field

The data fields are different when you are navigating a route and
when you have no specified destination. For example, the data
field provides the following information.
 When the route is set:
Distance to final destination, time needed to reach the final
destination and estimated arrival time are shown.
 When the route is not set:
Direction or altitude is shown.
icon
p Touching and holding the field allows you to display the
setting screen for the field.
 Refer to Data Fields on page 27
p The estimated time of arrival is an ideal value calculated
based on the speed limit value set in "Max. Speed" of vehi-
cle type setting and the actual driving speed. The estimated
time of arrival is only a reference value, and does not guaran-
tee arrival at that time.
 Refer to "Route Preferences" settings on page 25
Searching for a
destination
CAUTION
For safety reasons, these route-setting functions are not
available while your vehicle is in motion. To enable these
functions, you must stop in a safe place and put on the
handbrake.
p Some information regarding traffic regulations depends on
the time when the route calculation is performed. Thus, the
information may not correspond with a certain traffic regula-
tion when your vehicle actually passes through the location
in question. Also, the information on the traffic regulations
provided applies for a passenger vehicle, and not for a truck
or other delivery vehicles. Always follow the actual traffic
regulations when driving.
p [Destination from Phone] and [Online Search] on the
"New Route to..." screen can be used when the AVICSYNC
App connection is established.
 Be sure read Expanding the use of the navigation functions
(page 29) before using the AVICSYNC function.

How to plan your route

The following is a summary of the route setting procedure.
1 Search for a destination using various methods
on the [New Route] menu.
The location you searched for appears on the "Map Location"
screen.
2 Touch [Select as Destination].
 Refer to Using the "Map Location" screen on page 17
The "Route Summary" screen appears and countdown begins.
When the countdown ends, the guidance automatically starts.
If you touch the screen anywhere during the countdown, the
countdown stops and the screen will stay as it is.
 Refer to Checking route information and preferences on page
19
3 Touch [Start Navigation].
Your navigation system starts the route guidance.
 Refer to Understanding the route guidance on page 13