Pioneer AVIC-Z910DAB Operation Manual page 66

Menu Item Description
1
[Touch Panel Calibration] Touch two corners of the screen along the arrows then
touch the centres of the two [+] marks at the same
time twice.
2
Press
The adjustment results are saved.
3
Press
Proceed to 16-point adjustment.
4
Gently touch the centre of the [+] mark displayed on
the screen.
The target indicates the order.
5
Press and hold
The adjustment results are saved.
[Dimmer Settings]
NOTE
This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
Menu Item Description
[Dimmer Trigger] Setting the dimmer brightness.
[Auto] Switches the dimmer to on or off automatically according
to your vehicle's headlight turning on or off.
[Manual] Switches the dimmer to on or off manually.
[Time] Switches the dimmer to on or off at the time you adjusted.
[Day/Night] Setting the dimmer duration by day or night.
You can use this function when [Dimmer Trigger] is set to
[Manual].
[Day] Turns the dimmer function to off.
[Night] Turns the dimmer function to on.
66
En
.
once again.
• When you press , the previous adjustment
position returns.
• When you press and hold , the adjustment is
cancelled.
.
Menu Item Description
[Dimmer Duration] Adjust the time that the dimmer is turned on or off by
dragging the cursors or touching
You can use this function when [Dimmer Trigger] is set to
[Time].
TIPS
• Each touch of
forwards in the 15 minute width.
• When the cursors are placed on the same point, the dimmer
available time is 0 hours.
• When the cursor for off time setting is placed on the left end and
the cursor for on time setting is placed on the right end, the
dimmer available time is 0 hours.
• When the cursor for on time setting is placed on the left end and
the cursor for off time setting is placed on the right end, the
dimmer available time is 24 hours.
NOTE
The time display of the dimmer duration adjusting bar depends on
the clock display setting (page 75).
[Picture Adjustment]
You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable
these functions, you must stop in a safe place and apply the handbrake.
To adjust following menu, touch ,
Menu Item Description
[Brightness] Adjust the black intensity.
[-24] to [+24]
[Contrast] Adjust the contrast.
[-24] to [+24]
[Colour]* Adjust the colour saturation.
[-24] to [+24]
[Hue]* Adjust the tone of colour (which colour is emphasised, red,
[-24] to [+24] or green).
[Dimmer Level] Adjust the brightness of the display.
[+1] to [+48]
[Temperature] Adjust the colour temperature, resulting in a better white
[-3] to [+3] balance.
or .
or moves the cursor backwards or
, , to adjust.