Table of Contents
Advertisement
Click
Apply
COS Configuration
Set up the COS priority level.
COS priority: Set up the COS priority level 0 to 7 –High, Middle, Low,
Lowest.
Click
Apply
TOS Configuration
TOS priority: the system provides 0 to 63 TOS priority levels. Each
level has four types of priority – high, middle, low, and lowest. The default
value is 'Lowest'. When an IP packet is received, the system will check the
TOS level value in the IP packet. For example, if the TOS level 25 is high
and the port is following the TOS priority policy only, when a packet is
received, the system will check the TOS value of the received IP packet. If
the TOS value of received IP packet is 25(priority = high), then the packet
will have highest priority.
Click
Apply
IGMP Configuration
The Internet Group Management Protocol (IGMP) is an internal protocol of
the Internet Protocol (IP) suite. IP manages multicast traffic by using
switches, routers, and hosts that support IGMP. Enabling IGMP allows the
ports to detect IGMP queries and report packets and manage IP multicast
traffic through the switch. IGMP has three fundamental types of message.
90
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
button to make the settings effective.
.
button to make the settings effective.
Manual Documentation Number: EIR618-2SFP-T_5107m
Advertisement
Table of Contents
