Table of Contents
Advertisement
SPIRE 4.1 SYSTEM OVERVIEW
S
4.1: D
PIRE
ESCRIPTION
Spire 4.1 solves your ice and beverage service needs in a sanitary, space saving, economical way. It is designed to
manually fill with ice from any remote ice-making source. The unit includes the following components:
•
Single, multi-brand dispensing valve
•
Cold plate
•
Internal carbonator tank
•
External pump for carbonator
This dispenser dispenses cubes (up to 1-1/4 inch in size), cube-lets, and compressed (not flaked) ice and supplies
beverages direct from the Bag-In-Box (BIB) syrup supply with no additional cooling. Figure 1. shows the dimensions
of the Spire 4.1 unit.
S
4.1: S
PIRE
PECIFICATIONS
Model name
Total unit weight (empty)
Ice storage
CO
operating pressure
2
Ambient operational temperature
Maximum Storage Temperatures
Note: Damage to components may occur if storage condi-
tions exceed temperature limits.
Maximum number of brands/flavors available
Electrical
Dimensions
Noise Level
© 2017, Cornelius Inc.
Spire 4.1
Approximately 335 lb. (151.9 kg)
255 lb. (115.7 kg)
75 psig (0.52 MPa) max
Note: CO2 pressure is regulated down to 75 psi by a supplied
preset regulator.
o
o
65 to 95
F (18 to 35
C)
o
o
o
o
-4
F (-20
C) to 122
F (50
C)
14/6
120 V/1-phase/60 Hz
220 - 240 V/1-phase/50 Hz
15 A dedicated, protected circuit
42-9/16 in. (1.08 m) tall, to top of lid (Manual Fill Unit)
31-7/8 in. (0.81 m) wide
35-9/16 in. (0.90 m) deep
The unit emits acoustical noise with an A-weighted sound
pressure level no greater than 75 dB, as measured in
accordance with EN 60335-2-75
- 7 -
Spire 4.1 Installation Manual
Publication Number: 620066826INS
Hide quick links:
Advertisement
Table of Contents
