Frequency And Signaling; Lcd Display In Panel Test Mode - Kenwood NX-5700 Service Manual

Key "Func" appears on the sub LCD display
Function
[] Key/LCD check
[ ] High power/Medium
power/Low power
[ ] Function off
[ ] Compander on/off
[ ] External Speaker on/off
[AUX Function off
(Orange)]

• LCD display in panel test mode

(Power ON)
Type
Fx, Kx types are
displayed as "K".
*1: Wide 4k is displayed only when the PC test mode is used. However, it aims at production for
factory, or a operation verification of the transceiver. It is not necessary in operation of
the transceiver to adjust.

4.2.3 Frequency and Signaling

The transceiver has been adjusted for the frequencies shown in
the following table. When required, readjust them following the
adjustment procedure to obtain the frequencies you want in ac-
tual operation.
(1) Test frequency
CH RX (MHz)
1 155.05000 155.10000
2 136.05000 136.10000
3 173.95000 173.90000
4 155.00000 155.00000
5 155.20000 155.20000
6 155.40000 155.40000
7~16 - -
Display
The contents of the
pressed key etc.,
appear.
High: "H"
Medium: "M"
Low: "L"
-
On: icon appears
On: icon appears
-
Frequency range
136~174MHz
TX (MHz)
Key "Func" appears on the sub LCD display
[PTT] Transmit
[0] to [9] Function off
and
[#], [ ]
*3: When the mode is selected as P25, this function is enabled.
• LED indicator
Red LED Lights during transmission.
Green LED Lights when there is carrier.
• Sub LCD indicator
"Func" Appears at function on.
Temperature
Power
Sub LCD display
Main LCD display
(After 2sec.)
An : Analog narrow mode
Aw : Analog wide mode
As : Analog wide 4k mode *1
P1 : P25 Phase1 mode
P2 : P25 Phase2 mode
Nn : NXDN narrow mode
Nv : NXDN very narrow mode
(2) Test signaling
Analog mode signaling
No.
1 None
2 None
3 LTR Data
4 QT:67.0Hz
5 QT:151.4Hz
6 QT:210.7Hz
7 QT:254.1Hz
8 DQT:D023N
9 DQT:D754I
10 DTMF Decode
(CODE: 159D)
11 None
12 2-tone Decode
(A: 304.7Hz, B: 3106.0Hz)
Function
-
-
Signaling
No.
Channel No.
Squelch level
(Analog mode only)
RX
None
Square Wave
LTR Data
QT:67.0Hz
QT:151.4Hz
QT:210.7Hz
QT:254.1Hz
DQT:D023N
DQT:D754I
DTMF Encode
(CODE: 159D)
DTMF Encode (CODE: 9)
2-tone Encode (A: 304.7Hz,
B: 3106.0Hz)
(No.RA020<Rev.002>)1-37
Display
TX