D-Link DCS-4633EV User Manual page 43

Section 3: Configuration
IR & ICR
Use this section to configure the IR LED and IR-cut removable filter behavior
for your camera.
Automatic: The Day/Night mode is set automatically. Generally, the camera uses Day
mode and switches to Night mode when needed. Use the Sensitivity drop-
down box to select when the camera should switch to Night mode. The text
to the right of the drop-down box shows what the current lighting conditions
are like, and you can refresh this information by clicking the Refresh button.
Day Mode: Day mode enables the IR Cut Filter and turns off the IR LEDs.
Night Mode: Night mode disables the IR Cut Filter and turns on the IR LEDs.
Schedule Set Day/Night mode using the schedule set in the drop-down boxes. The
Mode: camera will enter Day mode at the starting time and return to Night mode
at the ending time.
Activate the Disable IR LED to set Day mode for the set times.
D-Link DCS-4633EV User Manual 43