Saeco Royal HD8930 Operating Instructions Manual page 58

ENGLISH
54
DESCALING
PAUSE
Downloaded from www.Manualslib.com
18 The machine performs the rinse cycle.
STEP 2/2
Note: A default amount of water is needed for the rinse phase. This allows
performing an ideal rinse cycle to ensure the best conditions to brew products.
The message about fi lling the tank for the rinse cycle is normal, as it is part of
the procedure.
Note: The rinse cycle may be paused by pressing the "
To resume the cycle, press the "
container or to go away for a short period of time.
19 Once the rinse cycle is complete, the machine carries out the warm-up
and rinse cycle to prepare for product brewing.
20 Empty the containers used to collect the liquid dispensed by the ma-
chine and reassemble the dispensing spout.
21 The machine is now ready for use.
Note:
- The descaling solution must be disposed of according to the manufac-
turer's instructions and/or regulations in force in the country of use.
- After completing the descaling cycle:
1 Wash the brew group as described in the "Brew Group" section in the
2
When the descaling cycle is complete, we recommend emptying the drip
tray.
manuals search engine
" button again. This allows you to empty the
"Cleaning and Maintenance" chapter;
Rinse the Cappuccinatore under running water.
" button.