Adjusting The Cappuccino Or Latte Macchiato Length - Saeco Royal HD8930 Operating Instructions Manual

ENGLISH
18
ESC
STOP MILK
ESC
STOP COFFEE
Downloaded from www.Manualslib.com

Adjusting the Cappuccino or Latte Macchiato Length

The machine allows you to adjust the brewed amount of Cappuccino (or
Latte Macchiato) according to your taste and/or the size of your cups.
Each time the "
brews a pre-set amount of Cappuccino (or Latte macchiato). This amount
may be reprogrammed according to your taste. Each button may be indi-
vidually programmed for a specifi c brew setting.
Note: Before programming, you need to prepare the machine and milk as
described in the Cappuccino section.
Note: As an example, the following procedure describes the programming of
the "
1 Place a cup or a mug under the dispensing spout.
MEMO
2
Press and hold the "
played and remove your fi nger. The machine is now programming.
The machine begins the milk dispensing phase. The "STOP MILK" mes-
MEMO
sage is displayed.
3
From now on, press the "
is reached in the cup.
4 Immediately after, the machine begins the coff ee brewing phase. The
MEMO
"STOP COFFEE" message is displayed.
5
From now on, press the "
fee is reached in the cup.
Now the "
released, the machine will brew the same amount that has just been set.
manuals search engine
" or " " button is pressed and released, the machine
" button, which is normally associated with cappuccino.
" button until the "MEMO" message is dis-
" button when the desired amount of milk
" button when the desired amount of cof-
" button has been programmed; each time it is pressed and