Saeco Royal HD8930 Operating Instructions Manual page 19

BEVERAGE MENU
MACHINE MENU
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
WATER MENU
HARDNESS
ENABLE FILTER
ACTIVATE FILTER
ACTIVATE FILTER
ACTIVATE FILTER?
ACTIVATE FILTER
INSERT FILTER.
FILL THE TANK
ACTIVATE FILTER
PLACE A CONTAINER
UNDER THE
WATER SPOUT
ACTIVATE FILTER
Downloaded from www.Manualslib.com
6 Place a large container under the hot water wand.
7
Hold the "
MENU
ming mode.
8
To select the "MACHINE MENU" option, press the "
Press the "
9
Press the "
Press the "
10
Press the "
lected.
Press the "
11
Press the "
Note: To quit the procedure press the "
displayed.
12
Press the "
13 Press the "
Wait until the machine stops dispensing the necessary water to activate
the fi lter.
At the end of the cycle, remove the container that you had previously
placed under the hot water wand.
Note: At the end of the procedure, the display automatically returns to the
product brewing page. If the water fi lter is not available, insert the small
white fi lter previously removed (see step 1) into the tank.
manuals search engine
" button pressed for 5 seconds to access the program-
" button for access.
" button until the "WATER MENU" option can be selected.
" button for access.
" button until the "ACTIVATE FILTER" option can be se-
" button for access.
" button.
" button until the
" button to confi rm the introduction of the new fi lter.
" button to confi rm.
ENGLISH
15
" button.
logo is