Remington HYPERFLEX XR1430 Use And Care Manual

IMPORTANT SAFETY
INSTRUCTIONS
HYPERFLEX
When using an electrical appliance, basic precautions should always be observed,
including the following. Please read all instructions before using this shaver.
XR1430
WARNINGS
To reduce the risk of burns, fire, electric shock, or injury to persons:
• When connecting the charging unit to a power source outside of the USA or
Canada, use a plug adapter suitable for the power outlet. This device has a charg-
ing adapter that will work with worldwide 100V-240V power outlets.
• Only use the power adapter provided with this device.
• Do not reach for the appliance if it has fallen into water while plugged into the
power source. Unplug from the power source at the wall immediately.
• Shaver may be rinsed under water or used in the shower, but never use the
charging unit in the shower.
• Detach the shaver and charging unit from the power source before cleaning.
• Except when charging, always unplug this appliance immediately after using.
• When recharging place in a safe position, out of the reach of children and pets.
• Close supervision is necessary when this appliance is used by, on, or near children
or individuals with certain disabilities or special needs.
• Use this appliance only for its intended use as described in this manual.
• Do not use attachments not recommended or provided by the supplier.
• Never operate this appliance if the electrical cord is frayed or the plug is damaged.
Use and Care Guide
• Keep the electrical cord away from heated surfaces.
• Never drop or insert objects into any of the appliances openings.
Register Your New Product Today! • This appliance is intended for household use only.
• Do not use outdoors, or operate where aerosol (spray) products are being used, or
By registering your new Remington ® product, you will receive these important benefits:
where oxygen is being administered.
Proof of Ownership Product Protection Product Registration Special Offers
Register online at: RemingtonProducts.com
• Always attach the plug to the appliance, then to the wall outlet. To disconnect,
Product Features
turn all controls to OFF, then remove plug from outlet.
• Always pull on the plug body to unplug the appliance from the wall socket.
2
Never pull on the electrical cord.
• Do not plug in or unplug this appliance when your hands are wet.
• Do not use extension cords or a voltage converter with this appliance.
• Do not wrap the power cord around the appliance.
• Always store the appliance and charger in low moisture area.
• Do not expose the appliance to temperatures over 140° F (60° C).
• Detach removable power cords from the appliance during storage.
• Do not use this shaver if the cutting head surfaces are damaged or broken as
facial injury could occur.
• This shaver and trimmer are intended for use on facial hair only. It should not be
used for longer hair on your head or body.
3
SAVE THESE INSTRUCTIONS
4
SHAVER PARTS
1. HyperFlex cutting head
2. Full floating heads
3. Power on/off button
4. Battery Indicator display
Performance Features
HyperFlex Cutting head
1
• Cutting head pivots and flexes to comfortably follow the contour of your face.
7
5
Full Floating heads
• Each head independently flexes to react to facial contours.
Dual Track Cutters
• Three rotary cutters with two cutting tracks for fast efficient shaves.
Lithium Battery
• Durable, long lasting power supply; 3X longer life than standard rechargeable cells.
60 minute run time
• Weeks of daily shaving on a single charge.
4 hour charge time
• Fast delivery of a full battery charge.
Waterproof
• Use dry or with shaving gel. Safe to use shaver in the shower for added comfort.
• Fast, simple cleaning under the faucet.
8
Worldwide voltage
• Provided charging adapter works with 100V to 240V power source.
Folding charge stand
• Rotate open to hold shaver while charging. Collapses down around shaver for
travel or storage.
6
Use with gel or foam in
the shower for ultimate comfort.
5. Pop-up detail trimmer
6. Charging pins
7. Charging Stand
8. Charging adapter
Charging Shaving Technique
Your HyperFlex shaver may be used either dry or wet with shaving cream or gel.
We recommend that you use the shaver in the shower for optimal performance.
Wet Shaving
A B
• Wet shaving will provide a very comfortable and close shave. The shaver is safe to
use in the shower or can be rinsed under running water at the sink.
Charging Process
• Wet your face and neck area with water.
1. Plug the power cord adapter into the charging stand.
Unfold the charging stand into the open position. Plug the cord into the port
• Apply shave gel or foam to your face.
at the side of the charging stand. The plug has a custom shape to match the
charge stand and prevent use with incorrect adapters. (A) • Press the power button to turn the shaver on. Rinse the cutting head under
running water.
2. Plug the adapter into the wall outlet.
Place the stand on a flat surface and where it cannot be accidently bumped into • Place the shaver cutting head against your skin with all three cutters touching
standing water such as a sink or bathtub.
your skin.
3. Place the shaver into the charge stand.
• Pressing lightly against your skin, move the shaver head in slow, small
Position the shaver body so the charging pins of the shaver mate with the
circular motions.
charging strips in the charge stand. (B) Note the LED battery display will
indicate that the battery is actively charging as noted in the LED indicator • Hairs on your face and neck may grow in different directions. Moving your shaver
section of this manual. against the direction of hair growth will be most effective.
4. Use the shaver until a recharge is required. • You may use your free hand to gently stretch your skin tight which can aid in mak-
Do not leave the charger plugged in so that you are recharging the shaver after ing hairs stand up to more easily enter the cutting slots.
every use. This will shorten the life of the battery. To use the charge stand to
• To trim sideburns or edges of goatees or beards, press the pop-up trimmer release
hold the shaver on your counter between uses, simply unplug the adapter cord
button to activate the trimmer. Place the trimmer blade parallel with your skin and
from the charge stand and store it away until a recharge is needed.
use downward strokes to cut.
• When finished, rinse your face and check for any hairs that may have been missed
for quick touch up.
LED Battery Indicators
• When using your shaver with foams or gels it is important to rinse the cutting head
clean after each use. This will avoid having the gels dry in the cutting head and
LED lights display the battery charge level clogging the shaver. Refer to the cleaning instructions to keep your shaver cutting
at peak performance.
• Low Charge: Top LED light will glow solid red to indicate the shaver needs to be
recharged. There is less than 5 minutes of run time remaining.
• Charging: Bottom LED light will glow solid green when shaver is placed in charger
to indicate the battery is taking a charge.
• Full Charge: When fully charged the green LED light will go off.