Remington VERSO XR1410 Use And Care Manual

IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be observed,
including the following. Please read all instructions before using this shaver.
XR1400
WARNINGS
XR1410
To reduce the risk of burns, fire, electric shock, or injury to persons:
• When connecting the charging unit to a power source outside of the USA or
Canada, use a plug adapter suitable for the power outlet. This device has a
charging adapter that will work with worldwide 100V-240V power outlets.
• Only use the power adapter provided with this device.
• Do not reach for the appliance if it has fallen into water while plugged into the
power source. Unplug from the power source at the wall immediately.
• Appliance may be rinsed under water or used in the shower, but never use the
charging unit in the shower.
• Detach the appliance and charging unit from the power source before cleaning.
• Except when charging, always unplug this appliance immediately after using.
• When recharging place in a safe position, out of the reach of children and pets.
• Close supervision is necessary when this appliance is used by, on, or near
children or individuals with certain disabilities or special needs.
• Use this appliance only for its intended use as described in this manual.
• Do not use attachments not recommended or provided by the supplier.
• Never operate this appliance if the electrical cord is frayed or the plug is damaged.
Use and Care Guide
• Keep the electrical cord away from heated surfaces.
• Never drop or insert objects into any of the appliances openings.
Register Your New Product Today!
• This appliance is intended for household use only.
• Do not use outdoors, or operate where aerosol (spray) products are being
By registering your new Remington ® product, you will receive these important benefits:
used, or where oxygen is being administered.
Proof of Ownership Product Protection Product Registration Special Offers
Register online at: RemingtonProducts.com
• Always attach the plug to the appliance, then to the wall outlet. To disconnect,
Product Features
turn all controls to OFF, then remove plug from outlet.
• Always pull on the plug body to unplug the appliance from the wall socket.
Never pull on the electrical cord.
1
• Do not plug in or unplug this appliance when your hands are wet. 2
• Do not use extension cords or a voltage converter with this appliance.
3
• Do not wrap the power cord around the appliance.
• Always store the appliance and charger in low moisture area.
• Do not expose the appliance to temperatures over 140° F (60° C).
• Detach removable power cords from the appliance during storage.
• Do not use this appliance if the cutting head surfaces are damaged or broken
as facial injury could occur.
• This shaver and trimmer are intended for use on facial hair only. It should not
be used for longer hair on your head or body.
4
SAVE THESE INSTRUCTIONS
9
10
11
KEY FEATURES
1. Rotary shaver head
2. Pop-up detail trimmer
3. Main body
4. Charging pins
5. Power on/off button
6. Battery Indicator display
7. Grooming head
Charging
Before using, read the important safety instructions in front of the manual.
1. Plug power adaptor into unit.
2. Charge unit for 24 hours before its first use.
3. Use unit until recharge is required.
CAUTION!
7 8 • Make sure the unit and your hands are dry when charging.
• Always charge the unit in a cool, dry place.
5
6
LED Battery Indicators
LED lights display the battery charge level
• Low Charge: Top LED light will glow solid red to indicate the shaver needs to be
recharged. There is less than 5 minutes of run time remaining.
• Charging: Bottom LED light will glow solid green to indicate the battery is taking a
charge.
• Full Charge: When fully charged the green LED light will go off.
12
Changing the Attachments
13
1. The unit should be turned off when changing attachments.
2. Remove the attachment by lifting upward from the base.
3. After selecting the attachment you want, align the hexagon shapes of the base
8. Adjustable comb and attachment and press to snap the attachment onto the base.
4. For brush heads, first snap the brush mount onto the base. Then snap the
9. Storage bag
cleansing or pre-shave brush onto the brush mount.
10. Deep cleaning brush
11. Brush mount
12. Daily cleaning brush (XR1410 only)
13. Pre-shave brush (XR1410 only)
14. Charging adapter (not shown)
Instructions for Use Instructions for Use
Cleansing Shaving
Note: If shaving with gel or foam, first wet face and then apply to applicable area.
1. Add a drop of facial cleanser to the brush head and dampen under the faucet or shower.
1. Press on/off button to turn the shaver on.
2. Press on/off button to turn on.
2. Hold the shaver at a right angle to the skin so that all three heads are touching
3. Divide your face into 4 main sections; forehead, nose and chin, left cheek, right cheek.
the skin with equal pressure.
4. While applying gentle pressure, move the rotating brush in circular motions over
3. Stretch the skin with free hand so hairs stand upright.
each section for approximately 30 seconds.
4. While applying light pressure, use short, circular strokes to shave the face
Grooming 5. Rinse shaver under warm water to clean away excess gel or debris.
1. Use the grooming head without the adjustable
Comb ~Cut
comb for trimming hair close to the skin. Cleaning and Care
Position Length
2. Attach the comb onto the groomer head by hooking
1 3/32"
(2mm)
the front of the comb over the trimmer blades, then
This is a wet/dry appliance.
snapping the comb down onto the groomer.
2 1/8" The appliance may be cleaned under warm water.
(3mm)
3. Adjust the comb setting to desired length by
rotating the wheel clockwise to increase length 3 5/32"
(4mm)
and counterclockwise to reduce length.
NOTE: When cleaning your shaver, make sure the shaver is turned off
4 3/16"
(5mm)
4. Press on/off button to turn the groomer on.
and disconnected from the power cord.
5. Place the groomer head against the skin and slide
5 1/4" (6mm)
CAUTION!
against the growth direction of hair.
• To clean the external surfaces of the shaver, use a damp cloth. Do not use strong
detergents or other chemicals.
Pre-Shave
• To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer or
Use the silicone pre-shave massage brush to exfoliate skin and lift hair for an extra
heater to dry the shaver.
close shave.
1. Dampen the silicone pre-shave massage brush.
2. Press on/off button to turn on.
3. While applying gentle pressure, move the rotating brush in circular motions over
each section of face.
A B
Daily:
Use with gel or foam in
1. Pull rotary head face of shaver off of lower hair pocket. (Diagram B)
the shower for ultimate comfort.
2. Tap out excess hair shavings. (Diagram C)
3. Rinse the head of the shaver in running water.
4. Close head assembly.
C