How To Connect Internal Cables - Datavideo GO 500 REPLAY Instruction Manual

Cable requirements:
 Cable No. 1-5: DC Plug Cable built into the RMK-6 （1 & 2: 85CM，3 & 4 & 5：45CM）
 Cable No. 6: HDR-10 Power Cable (40 CM)
 Cable No.7: HDR-10 DC Power Cable (40 CM)
 Cable No. 8: RMC-400 DC Power Cable (100 CM)
 Cable No. 9: HDMI Cable (100 CM)
 Cable No. 10: DC Plug to Mini-Din Cable
 Cable No. 11: HDMI Cable(50CM)
 Cable No. 12: HDMI Cable (100CM)
 Cable No. 13: HDMI Cable (50CM)
 Cable No. 14: HDMI Cable (100CM)
 Cable No. 15: BNC 180 Degree Cable (50CM)
 Cable No. 16: BNC 180 Degree Cable (50CM)
 Cable No. 17: USB Type A to USB Type A Cable(180CM)
 Cable No. 18: USB Type A to USB Type A Cable (180 CM)
 Cable No. 20: HDMI Cable (100CM)
1. Please connect one end of the Cable No. 7 (HDR-10 DC Power Cable) to the second power
interface (DC OUT 12V) from the right side on the bottom side of the alumimum power box
module rear panel. After that, please connect another end of the cable to the DC IN 12V power
interface on the rear panel of the HDR-10.

How to Connect Internal Cables

7
8