Powering On; Powering Off; Packing Away - Datavideo GO 500 REPLAY Instruction Manual

Powering On

Each product built into the GO 500 Replay receives DC power from the power connection on the
rear of the RMK-6 unit of the GO Replay.
Please ensure the RMK-6 is fed with a DC power supply before attempting to switch on the GO 500
Replay.
If a product within the GO 500 Replay fails to start after the power switch on the rear of the RMK-6
is switched on please locate the on/off switch for that product which has not yet started.。
For further advice on using a product within the GO 500 Replay please refer to the related manual.

Powering Off

Before powering off the GO 500 Replay via the power switch on the rear of the RMK-6 please ensure
that two sets of the HDR-10 have been stopped.
。

Packing Away

Carefully fold the 10.1" TLM-102 monitor to its horizontal 1U shipping position. Please remember
to secure its position so it cannot move when in transit.
Now return the GO 500 Replay to the HC-800 case and the product is ready to be moved.。
16