Table of Contents
Advertisement
Transport & Placement
The GO 500 Replay is heavy and the weight is about 22kg – Do not attempt to lift or move it on
your own. It's recommended to have at least two people to move the GO 500 Replay out of the
carton. If the GO 500 Replay is packed in the 19" flight case, it needs one person only to move the
system.
Always use a trolley to safely transport the GO 500 Replay over distances of 2 Metres or more. The
unit should be always moved and placed in a horizontal position; do not place or try to move the
unit in any other way as damage or injury could result.
Place the GO 500 Replay on a strong, stable, flat surface that is capable of supporting the weight.
Do not use a folding or single leg table to support the GO 500 Replay.
Opening the Case
1. Rest the HC-800 on a flat horizontal surface with the carry handle facing the user
2. Open the buckles on two sides of the carry handle.
3. Lift open the cover
4. Remove the GO 500 system from the case.
Setting up the TLM-102 – Dual 10.1" LCD Monitor
1. Bring the LCD panel into an upright viewing position.
2. After that, please refer to following chapter "How to Connect Internal Cables" to connect all the
cables according to the instructions.
3. After all of the cables are connected properly, just remember to turn on the power switch and
then it's time for you to enjoy the efficiency and the convenience of the GO 500 Replay.
Installation
7
Advertisement
Table of Contents
