Sharp MX-M266N Manual page 36

IMAGE SEND COMMUNICATION ERROR CODES
Report Code
Result Displayed
(Result)
NG80 XXXX *1
80
81 NG REPORT
82 NO REPORT
83 NG LIMIT
84
REJECTED
NG85 XXXX *1
85
86 RECEIVED
NG87 XXXX *1
87
NG88 XXXX *1
88
NG89 XXXX *1
89
NG90 XXXX *1
90
NG91 XXXX *1 *2
91
NG92 XXXX *1 *2
92
NG93 XXXX *1
93
NG94 XXXX *1
94
36
Communication Interruption Content
NIC connect failure (network abnormality)
 Check for disconnection of cables.
 A network trouble (CE-XX) occurs.
 The port is set to DISABLE.
 Authentication of the POP server is failed when POP before SMTP is
enabled.
 When an error other than the communication result code 93 or 94 in D-
SMTP send (including error response of 5XX)
In Internet FAX send, reply of receive confirmation of the remote machine is
not normal. (Including PC-Internet FAX).
 Error of the disposition-modifier.
 The disposition modifier is not in an error, and the disposition type is other
than displayed, dispatched, or processed.
In Internet FAX send, time-out occurs in waiting for receive confirmation
from the remote machine. (Including PC-Internet FAX).
 In a case where send confirmation wait time-out time is other than 0,
when send confirmation reply from an Internet FAX destination is not
received.
 Recalls of the set number of recalls are performed, but send confirmation
reply from an internet FAX destination is not received.
In E-mail/FTP, Internet FAX send, the send data size exceeds the upper limit
of send data.
In e-mail receive, a sender is registered in receive reject address/domain.
<Receive>
In e-mail receive, an error occurs in communication with POP3 server.
 Header acquisition error.
 Time-out during mail receive
In e-mail receive, an unsupported attached file is received. Only the TIFF-F
type is supported for attached files.
 The TIFF-F type of the attached file cannot be recognized.
 There is no attached file.
In e-mail receive, an attached file cannot be stored in memory.
* Memory over
In SMTP e-mail receive, an attached file cannot be stored in memory.
 Cannot be stored in memory.
 The number of items of acting receive data is the maximum, and an
additional data cannot be stored.
In SMTP e-mail receive, an error occurs in communication with the mail
server.
 Time-out occurs during e-mail receive.
After reservation by re-operation of document filing, conversion for image
send cannot be made.
Data cannot be written to the memory device when Scan To USB is executed.
 The memory device is disconnected during writing to the memory device.
 An error occurs due to a memory device trouble.
The USB device memory overflows during writing data into the memory
device when "Scan to USB" is executed.
When error in D-SMTP send (with recall):-
 An error response of 4XX occurs during communication with the SMTP
server.
 Time out occurs after establishment of connection with the SMTP server.
When busy in D-SMTP send
Time out occurs during establishment of connection with the SMTP server.
SHARP