Sharp MX-M266N Manual page 35

Technical handy guide
Hide thumbs Also See for MX-M266N:
Table of Contents

Advertisement

SHARP
Report Code
Result Displayed
(Result)
58
REJECTED
59
RX NO F-CODE POLL
60
NO F-CODE POLL
61
RX POLL # NG
62
F POLL PASS # NG
63
NO F FUNC
64
NO F-CODE
67
F PASS # NG
68
BOX NO. NG
69
MEMORY OVER
70
JOB MEMORY OVER
NG71 XXXX *1
71
NG72 XXXX *1
72
NG73 XXXX *1
73
NG74 XXXX *1
74
NG75 XXXX *1
75
NG76 XXXX *1
76
NG77 XXXX *1
77
NG78 XXXX *1
78
NG79 XXXX *1
79
IMAGE SEND COMMUNICATION ERROR CODES
In reception, data are sent from a remote machine of receive inhibit number.
<Receive> (Not rejected in the bulletin board send or the F code bulletin
board send.)
In F code polling (calling), the remote machine has no DIS bit 47 (polling
function). <Polling> In F code polling (calling), the called side has no send
data. (DIS bit 9 is 0.)<Polling>
In F code polling (calling), DCN is received for SEP. <Polling>
In bulletin board, there is no send data for SEP. <Bulletin board>
In bulletin board, the sub address (bulletin board number (SEP)) is not
matched. <Bulletin board>
In bulletin board, the pass code (PWD) is not matched. <Bulletin board>
In F code sending, the remote machine has no DIS bit 49 (sub address
function). <Send> (Check that the remote machine conforms to F code.)
In F code sending : <Send>
1) DCN is received for SUB. --- Check the box number.
2) DCN is received for SID. --- Check the box number and pass code.
In F code receiving : <Receive>
"F code relay broadcasting" or "F code confidential reception" is "Inhibited
with soft SW."
In F code receiving, the pass code (SID) is not matched. <Receive>
In F code reception, a box number which is not registered is specified. (SUB is
not matched.) <Receive>
Memory over in quick online sending <Send>
In PC-FAX reservation, the number of remote parties is exceeded. <Send>
In PC-FAX reservation, data sent from PC includes some errors. <Send>
In department management setting on the machine side:
In reservation from PC-FAX or PC-Internet FAX, a department number which
is not registered on the machine side is specified. <Send>
In reservation from PC-FAX or PC-Internet FAX, the department number is not
specified. <Send>
In reservation from PC-FAX or PC-Internet FAX, the use quantity limit is
exceeded. <Send>
When reserving specified filing in document filing in PC-FAX or PC-Internet
FAX;
The pass-code for the folder is set on the machine side and the pass-code
from PC-XXX does not match with it. <Send>
The pass-code for the folder is set on the machine side and no pass-code is
specified by PC-XXX. <Send>
 Reservation cannot be made due to machine busy. (Reservation of PC-FAX
cannot be accepted.)
 When "PC-FAX or PC-internet FAX send inhibit" is set on the machine side.
Reserved with receive confirmation request in PC-Internet FAX, but the
Internet FAX sender is not registered on the machine side. <Send>
In reserving specified filing in PC-FAX or PC-Internet FAX, the machine has no
filing function.
The filing function is inhibited on the machine side when filing specification is
reserved by PC-FAX or PC- Internet FAX.
An authentication error occurs when PC-FAX or PC-Internet FAX is reserved.
Communication Interruption Content
35

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m316n

Table of Contents