Sharp XE-A202 Quick Start Manual

XE-A202 Quick Start Guide
The following describes how to get the cash register ready to operate. Follow these steps before you use the cash register for the first time.
Before you set up the cash register, prepare three new "AA" batteries which are necessary for memory backup. Find a stable and flat surface not subject to direct radiation, to place the cash register.
1 Initializing the Cash Register
To ensure the cash register operates properly, please use the
following procedure:
1. Make sure the power cord is unplugged and batteries are
not installed on the register.
2. Insert the manager
OPX/Z
(MA) key into the
OFF
mode switch and turn
VOID
it to the REG position.
PGM
3. Insert the plug of the power cord into
the AC outlet. The buzzer will sound three
times.
IMPORTANT:
This operation must be performed
without batteries installed.
4. The cash register has now been initialized.
The register display will show "0.00" with "
2 Installing the Batteries
1. Push the printer cover forward and detach
it.
2. Open the battery compartment
cover next to the paper roll
cradle.
3. Install three new "AA"
batteries as shown below.
(Batteries are not supplied
with the cash register.) Make
sure that positive (+) and
negative (-) poles of each
battery are properly oriented.
4. When the batteries are properly installed, "
display will disappear. Close the battery compartment
cover.
3 Installing the Paper
If you want to use a paper roll for journal printing, please refer to
GETTING STARTED section of the instruction manual.
1. Lift up the print roller release lever to unlock and open the print roller
arm.
REG
MGR
X1/Z1
X2/Z2
2. Set a paper roll in the paper roll cradle as illustrated below.
To the printer
Correct
".
3. Feed the end of the paper along with the
paper positioning guides as
illustrated at the right.
4. While holding down the paper, slowly close
the print roller arm, and push down the
arm until you hear a click locking the arm.
Make sure securely you push down the
center of the wing part of the arm as
illustrated at the right. The paper will be
fed automatically.
5. Cut off the excess paper using the edge of
the inner cover, and replace the printer
F
cover. Press the key to make sure the
paper end comes out of the printer cover
and clean paper appears.
" on the
NOTE: If the print roller arm is not securely
locked, printing is not done right. If this problem occurs, open the arm,
and close the arm as instructed above.
4
(for receipt printing)
Set the mode switch to the PGM position.
Print roller arm
Setting the Date
Enter the date in 8 digits using the month-day-year format. Then press
Example:
Print roller
release lever
Setting the Time
Enter the time in 4 digits ("hhmm" format) using the 24 hour system. Then press
s
Example:
To the printer
Tax Programming
Incorrect
1. Selecting the Tax System
First, you must select the tax system. This cash register has 11 types of tax system.
Each tax system is different in calculation method of GST (Goods and Service Tax)
Paper positioning
and PST (Provincial Sales Tax) ("Add on tax" or "VAT"/"Tax on base" or "Tax on tax").
guides
Contact your local tax office for the correct sales tax information.
Select one tax system suitable for your province and for your type of retail business,
and set it for your register.
For most situations tax type number 6 (Tax 4 = GST and Taxes 1, 2, and 3 for PST)
is recommended. For provinces whose provincial sales tax is "tax on tax", use the
type number 5.
Use the following key sequence to set tax type number 6:
s
Below is an explanation of all the tax system options.
Tax type
number
Basic Programming
OPX/Z
OFF
VOID
PGM
08262003 s
Date (August 26, 2003)
.
1430 s
Time (2:30 p.m.)
➔ 70 ➔ @ ➔ 6 ➔ s
Tax type number (6)
Tax 4 method Tax 3 method
GST GST PST
1 VAT VAT -
2 VAT VAT -
3 VAT - Tax on tax
4 VAT - Tax on base
5 Add on Tax - Tax on tax
6 Add on Tax - Tax on base
7 Add on Tax VAT -
8 Add on Tax VAT -
9 Add on Tax Add on Tax -
10 Add on Tax Add on Tax -
11 VAT - VAT (Tax on base)
Printed in China / Imprimé en Chine
English
REG
MGR
X1/Z1
X2/Z2
s
.
➔ A
Tax 2, 1 method
PST
Tax on tax
Tax on base
Tax on tax
Tax on base
Tax on tax
Tax on base
Tax on tax
Tax on base
Tax on tax
Tax on base
Tax on tax
Continued...
KS(TCADH2446RCZZ) 1