Code Autosearch - RCA RCU900 User Manual

RCU900_IB_revC.qxp 12/3/02
Code Search (continued)
that some codes can turn your device
on and off but are not able to
control its other functions. This
process allows you to bypass codes
you've already tried.
If your device responds and
Note:
you accidentally overshoot that code
by pressing the ON•OFF key again,
press the CH - key or DOWN
ARROW key to backtrack through
the code library. You can change the
direction to forward once again by
pressing the ON•OFF, CH + , LCD UP
ARROW, or PLAY keys.
9. Once the device to be controlled
responds to the commands,
press and release the LCD OK key
to install the code. The touchscreen
returns to the Main Setup Screen. The
Code Search entry is now complete.
10. Press CLEAR on the Main Setup
Screen to exit Setup Mode.

Code Autosearch

Your RCU900 has the ability to automatically scroll through
the entire code library by using the Autosearch feature.
To start a Code Autosearch, follow these steps:
1. Manually turn on the device to be
controlled (TV, VCR, DVD, etc.).
2. Press and hold the SETUP key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main Setup
Screen. This process takes
approximately 2-3 seconds.
3. Release the SETUP key.
4. Press and release the LCD CODE
key. The LED indicator light blinks
once to indicate acceptance of
the keypress.
5. The touchscreen now shows the
Device Setup Screen. Press and
release the device key on the rubber
keypad for the device whose code
you want to enter (TV, VCR,
SAT/CBL, etc.). The LED indicator
light blinks once to indicate
acceptance of the keypress.
6. For AUX1 or AUX2, press and release
the AUX device key. Select the desired
device key to be programmed under
AUX (TV, VCR, SAT/CBL, etc.).
7. The LCD touchscreen shows the
Code Setup Screen. Press and release
the LCD SEARCH key.
8. The LCD touchscreen shows the
Search Setup Screen. Press the
ON•OFF key on the rubber keypad
just once. If you do not press any
other keys, the Autosearch feature
automatically starts in six seconds.
10
9:45 Page 10