Table of Contents
Advertisement
RCU410_US_IB_REVB
7/16/03
Accessing a Menu System
1. Make sure your components
are turned on and your TV
is set to the component's input.
2. Press the component key on
the remote (TV, VCR, DVD•AUX,
or DBS•CABLE).
(BLINK)
3. Press the MENU key. The indicator
light blinks continuously to indicate
MENU
the remote is in Menu Mode and the
component's menu should appear
on the TV screen.
Highlighting and Selecting Menu Items
To navigate On-screen Menus, use the VOL UP/DOWN
and/or CHAN UP/DOWN keys.
VOL UP/DOWN keys move the cursor (or the highlight)
right/left. CHAN UP/DOWN keys move the cursor (or the
highlight) up/down.
For RCA, GE or PROSCAN products, press the MENU or
ENTER key to select the highlighted item. If menu items
have numbers next to them, you can use the number keys
to select an item. Additionally, the ENTER key can be used
to select menu choices.
For Sony products, pressing the ENTER key while
in Menu Mode returns you to the previous menu.
This is an example of a DVD disc On-screen Menu.
English is the menu choice highlighted. Using this
remote control, you would press the ENTER key
to select English.
To highlight another language, you would press the
CHAN DOWN key (In the example above, the highlight
would move to Español).
Notes:
All functions in competitive models and
brands of products may not be fully supported.
The remote will automatically time out in Menu
Mode and the indicator light will stop blinking after
approximately 10 seconds of inactivity (no keys being
pressed). For DVD menus, the Menu Mode will time
out after approximately 15 seconds.
Because of the wide variety of menu formats,
some experimenting may be required.
Exiting a Menu System
To exit Menu Mode, press the corresponding component
key on the remote (TV, VCR, DVD•AUX, or DBS•CABLE).
The indicator light goes out and the remote reverts to its
normal mode of operation.
12
15:36
Page 12
Hide quick links:
Advertisement
Table of Contents
