Specifications - Cisco CPS-MSP-1RU-K9 User Manual

Appendix E 16 x D1 and 8 x D1 Video Capture Cards
Table E-3
PID
CIVS-PAN-32BNC
CIVS-CAB-16V
CIVS-KYBD2232=

Specifications

Table E-4
Table E-4
Item
Connectivity
Internal connection
External connection
Physical
Form factor
Length
Height
Bracket
Power and environmental requirements
Power
Operating temperature
Non-operating temperature
Operating relative humidity
Non-operating relative humidity 5% to 95% (non-condensing)
Required airflow
OL-21838-03
Part Numbers (continued)
Item
BNC breakout panel
Multi-channel video
cable
Serial Port Data
Converter (Generic)
lists the physical specifications for the 16 x D1 and 8 x D1 video capture cards.
Specifications for 16 x D1 and 8 x D1 Video Capture Cards
Description
PCIe (PCI Express) full height, ¾ length
DB37 connector to provide 8 or 16 NTSC or PAL video channels;
this connector is intended to interface to a BNC breakout panel
PCIe (PCI Express) full height, ¾ length
10.03 inches (254.76 mm)
3.87 inches (98.30 mm)
Standard bracket plus additional gold finger tab
12VDC +/– 20%
24 W typical, 29 W maximum
50° to 95°F (10° to 35°C)
–40° to 158°F (–40° to 70°C)
8% to 90% (non-condensing)
140 LFM
Description
An optional panel that provides up to 32 BNC
ports for connecting video cameras to video
capture cards. The panel is installed behind the
server and connected to the video capture card
using the multi-channel video cable.
A DB37 cable that connects the video capture card
to the BNC breakout panel. The cable is 2.5 feet
(76 cm) long and provides connection for up to 16
video ports. The same cable is used with 8 and 16
channel video capture cards.
Converts RS-232 serial signals to RS-485/RS-422.
Use this converter when connecting multiple
analog PTZ cameras to the MSP server serial port.
See the "Connecting and Configuring Analog PTZ
Cameras" section on page E-14
information.
Cisco Physical Security Multiservices Platform Series User Guide

Specifications

for more
E-13