Motion Detection With Low Quality Cameras - Cisco CPS-MSP-1RU-K9 User Manual

Appendix E 16 x D1 and 8 x D1 Video Capture Cards
Table E-1
Parameter
H.264 frame rates
Motion JPEG frame
rates supported in
Cisco VSM

Motion Detection with Low Quality Cameras

Video containing large amounts of visual noise (sometimes caused by low quality cameras) may be
prone to triggering false motion events. Use low sensitivity motion detection settings to capture only
motion events of interest.
OL-21838-03
Encoding Parameter Limitations
Limitation
Primary Video Stream
• Primary NTSC @ (D1 or 4CIF): 30,15,10,7,5,5,3,2,1
• Primary NTSC @ (2CIF or CIF): 15,10,7,5,5,3,2,1
Primary PAL @ (D1 or 4CIF): 25, 12.5, 6.25, 5, 2.5, 1
•
Primary PAL @ (2CIF or CIF): 12.5, 6.25, 5, 2.5, 1
•
Secondary Video Stream
Secondary NTSC @ (2CIF or CIF): 15,10,7,5,5,3,2,1
•
The H.264 frame rate is selected automatically based on the selected
Note
bitrate.
Primary Video Stream
Primary NTSC @ (D1 or 4CIF): 15, 10, 7.5, 5, 3, 2, 1
•
Primary NTSC @ (2CIF or CIF): 10, 7.5, 5, 3, 2, 1
•
Primary PAL @ (D1 or 4CIF): 12.5, 6.25, 5, 2.5, 1
•
Primary PAL @ (2CIF or CIF): 6.25, 5, 2.5, 1
•
Secondary Video Stream
Secondary NTSC @ (2CIF or CIF): 10, 7.5, 5, 3, 2, 1
•
Secondary PAL @ (2CIF or CIF): 6.25, 5, 2.5, 1
•
Although other Motion JPEG frame rates can be selected in Cisco
Note
VSM, only the settings listed in list section are supported.
Note All video channels on a card should be set to the same video standard
(NTSC or PAL).
Cisco Physical Security Multiservices Platform Series User Guide

Motion Detection with Low Quality Cameras

E-5