Setting Up Your Channels - RCA T25208 User Manual

SYSTEM SET-UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME
+/–/ENTER/MENU
ON
OFF
AUTO
+/–/ENTER/MENU
CH SET-UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/–/ENTER/MENU
CH SET-UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/–/ENTER/MENU
Chapter 1
Setting Daylight Saving Time
The Daylight Saving Time is set to the AUTO position by default. If you want to
set the time manually you need to set it "ON" on the first Sunday in April, and
ON OFF
set it "OFF" on the last Sunday in October.
Note: If your area does not have Daylight Saving Time, you need to set
the position to OFF.
1. Press the MENU on the remote (the MENU appears).
2. Select SYSTEM SET-UP, then press ENTER.
3. Select DAYLIGHT SAVING TIME, then press ENTER.
4. Press the up or down arrow button to either turn ON or OFF Daylight
Saving Time.
5. Press the MENU button until the MENU screen disappears.

Setting Up Your Channels

The TV/VCR is set to receive TV cable channels. If you want the TV/VCR to
receive UHF/VHF channels, follow the directions below.
1. Press MENU on the remote (the MENU appears).
2. Press the down arrow button to select CH SET-UP, then press ENTER.
3. Press ENTER to select TV mode.
4. Press MENU until the MENU screen disappears.
Complete Auto Channel Memory
The Auto Channel Memory allows the TV/VCR to search for all channels
viewable through your antenna or cable TV system. This is sometimes called
"auto programming."
1. Press MENU on the remote (the MENU appears).
2. Press the down arrow button to select CH SET-UP, then press ENTER.
3. Press the down arrow button to select AUTO CH MEMORY, then press
ENTER. The TV searches for all available channels and will place them into
your TV's memory.
4. Press MENU until the MENU screen disappears.
Connections & Setup
11