Table of Contents
Advertisement
Picture Search Options
The most basic way to search during playback is using the FF (Fast Forward) or REW (Rewind)
buttons. This section contains several other options available for searching a tape.
Picture Search
You can search a tape during playback. Sound is turned off during picture search. Search works
well for tapes recorded in SLP speed.
1. During playback, press FF to search forward or REW to search in reverse.
2. Press PLAY to return to normal playback.
Frame Advance
Frame advance allows you to view one-stop action frame after another during playback. Frame
advance works well for tapes recorded in SLP speed.
1. Press PAUSE during playback to freeze the action.
2. Press FR. ADV each time you want to view the next frame of the scene. Press and hold
FR. ADV to view the tape frame-by-frame.
3. Press PAUSE or PLAY to return to normal playback.
Commercial Scan
This is useful for skipping commercials or short program segments. Press SKIP/SEARCH during
playback to advance the tape approximately 60 seconds.
Chapter 2
Using the TV/VCR's Features
Index Search
The TV/VCR automatically records index marks on the tape each time you
begin recording. During playback you can locate the program you want to play
by the number of index marks. Your TV/VCR has two index playback features.
You can select a specific index number or search by scan and play.
To Select Scan and Play Index Playback:
1. Insert the pre-recorded tape and press STOP.
2. Press SKIP/SEARCH on the remote to display the Index Search screen.
3. Press FF on the remote to scan forward or REW to scan in reverse.
When the TV/VCR locates an index mark, it will stop and play a few
seconds of the program following the mark.
4. At any time during the search, press PLAY to stop searching and begin
playback, or press STOP to stop the search.
If the beginning or end of the tape is reached during the search, the
message "End of tape" appears.
27
Advertisement
Table of Contents
