Table of Contents
Advertisement
Using the TV/VCR's Features
Copying and Editing Tapes
Use another VCR or camcorder as the playback VCR and the TV/VCR as the recording VCR.
Note: The unauthorized recording of television programs and other materials may
infringe upon the rights of others.
26
1. Turn on the VCR or camcorder and the TV/VCR.
2. Press 00 on the TV/VCR's remote to select the line input (VIDEO1 or
VIDEO2). Pressing 00 once tunes the TV/VCR to the AUDIO/VIDEO1 input
jacks on the rear of the TV/VCR. Pressing twice tunes the TV/VCR to the
AUDIO/VIDEO2 input jacks on the front of the TV/VCR.
3. Insert the tape you want to copy into the playback VCR or camcorder.
Insert a blank tape with the safety tab intact into the TV/VCR.
4. Start the playback VCR or camcorder playing. If the tape was not recorded
on the playback VCR, streaks may appear and you may need to adjust the
tracking. When you reach the place you want to begin copying, place the
playback VCR or camcorder in play pause.
5. Press REC, then PAUSE on the TV/VCR's remote.
6. Press PAUSE on both the VCR or camcorder and the TV/VCR's remote at the
same time to begin copying the tape.
7. Edit out segments that you do not want to copy by pressing PAUSE on the
TV/VCR's remote to pause the tape. Then, locate the next segment you
want to copy on the playback VCR or camcorder by using FORWARD,
REVERSE, or PLAY. Press PAUSE on the playback VCR or camcorder. Press
PAUSE at the same time on both the VCR or camcorder and the TV/VCR's
remote to resume copying.
8. Press STOP on both the VCR or camcorder and the TV/VCR's remote when
you are finished.
Chapter 2
Advertisement
Table of Contents
