Removal Log Grate; Removal Of Logs/Ember - Lennox Merit MPE36 Service Manual

Remove Grate and Log
Set
• The grate must be removed
before removing the log set.
• Remove the two screws that
secure the grate in place
and remove the grate.
• Place your thumbs on the
front edge of the ember
base approximately 1/3 of
the way in from the ends of
the log set.
• Push towards the back
causing the ember base to
flex. As you push gently lift
the front edge of the ember
base. The log set and
ember base may be lifted up
and out of place.