Lennox MPE-27 Installation Instructions And Homeowner's Manual

Lennox MPE-27 Installation Instructions And Homeowner's Manual

Merit plus series 27" electric fireplace
Hide thumbs Also See for MPE-27:

Advertisement

RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE
A French manual is available upon request. Order Form Number
850,035CF.
Ce manuel d'installation est disponible en francais, simplement en
faire la demande. Numéro de la pièce 850,035CF.

INSTALLATION INSTRUCTIONS

AND HOMEOWNER'S MANUAL
27" Electric Fireplace
P/N 850,035M REV. A 10/2006
MODELS
MPE-27
This manual will enable you to obtain a safe, efficient and dependable
installation of your electric fireplace. Please read and understand these
instructions before beginning your installation.
Do not alter or modify the fireplace or its components under any
circumstances. Any modification or alteration of the fireplace system,
including but not limited to the fireplace and accessories, may void the
warranty, listings and approvals of this system and could result in an
unsafe and potentially dangerous installation.
DO NOT STORE OR USE GASOLINE OR OTHER FLAM-
MABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS
OR ANY OTHER APPLIANCE
C
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
®
MERIT
PLUS SERIES
INSTALLER: DO NOT DISCARD THIS MANUAL
PLEASE LEAVE FOR THE HOMEOWNER
FOR YOUR SAFETY
®
US
CSA Report No. 46-M198
1

Advertisement

Table of Contents
loading

Summary of Contents for Lennox MPE-27

  • Page 1: Installation Instructions

    MERIT 27" Electric Fireplace P/N 850,035M REV. A 10/2006 MODELS MPE-27 This manual will enable you to obtain a safe, efficient and dependable installation of your electric fireplace. Please read and understand these instructions before beginning your installation. Do not alter or modify the fireplace or its components under any circumstances.
  • Page 2: Table Of Contents

    CONGRATULATIONS! In selecting this DAVE LENNOX Merit finest and most dependable fireplace found anywhere. A beautiful and prestigious addition to the finest homes. Welcome to a Family of hundreds of thousands of satisfied LENNOX Fireplace Owners. Please read and carefully follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual.
  • Page 3: Locating Fireplace

    AVOID THE USE OF AN EXTENSION CORD BECAUSE THE EXTENSION CORD MAY OVERHEAT AND CAUSE A RISK OF FIRE. HOWEVER, IF YOU HAVE TO USE AN EX- TENSION CORD, THE CORD SHALL BE NO. 14 AWG MINIMUM SIZE AND RATED NOT LESS THAN 1800 WATTS, 15 AMPS.
  • Page 4: Framing Specifications

    FRAMING SPECIFICATIONS " (572 mm) 32" (833 mm) 25" (635 mm) (1302 mm) Corner View Note: Framing dimensions are calculated for an in front of the wall front face installation with finish dry wall in place. Figure 2 FIREPLACE SPECIFICATIONS Figure 3 Electrical Junction...
  • Page 5: Clearances

    Fireplace Specifications Cat. No. H3428 Model: MPE-27 Description: Merit Plus Electric Fireplace - 27” Shipping Weight: 78 lb.'s (35 KG) Packaging: 34 1/2” x 14” x 34” (876 mm x 356 mm x 864 mm) 14.1 cu. ft. Power Requirements: (120 Volt, 60 Hz.)
  • Page 6: Operating Instructions

    NEW CONSTRUCTION OR RENOVATION 1. Select a location that is not prone to mois- ture and is located at least 3 feet (or 0.9m) away from combustible materials such as cur- tains or drapes, furniture, bedding, paper, etc. 2. Place the unit in selected location to see how it will look in the future.
  • Page 7: Back Glass

    WARNING: ALWAYS DISCONNECT POWER AND ALLOW THE ELEC- TRIC FIREPLACE TO COOL BEFORE PERFORMING ANY CLEANING, MAINTENANCE OR RELOCATION OF THIS ELECTRIC FIREPLACE. TURN CONTROLS TO OFF AND RE- MOVE PLUG FROM OUTLET OR TURN OFF CIRCUIT BREAKER TO ELECTRIC FIREPLACE. BACK GLASS 1.
  • Page 8: Flame Generation Bulbs

    FLAME GENERATION BULBS 1. Hold the front glass panel, lift up and move backwards to take out the front glass panel ( refer to Figure 6 ). 2. From the bottom, gently pull forward and lift up log/ember bed until front edge clears the front of the unit (do not pull up on logs).
  • Page 9: Placing Glowing Embers

    FOR THE MPE-27 The accessory parts and components listed on this page are to be used only with your MPE-27 electric fireplace. Separate installa- tion instructions are packaged with all ac- cessories. If you encounter any problems or have ques-...
  • Page 10: Troubleshooting

    SYMPTOM 1. Fireplace turns off and Fireplace has overheated. will not turn on. Wiring may be loose or the 2. Flame is fixed flame motor may be defective. (unmoving). 3. Dim or poorly visibly Light bulb(s) burnt out or wiring is loose. flame or log set and ember is not glowing.
  • Page 11: Replacement Parts

    Switch, Toggle (1 Each) Wire Harness Remote Control Panel, Flame Cover Panel Glass REPLACEMENT PARTS COMPONENT DIAGRAM Catalog No. Qty. H1623 H3863 H3864 H3865 H3866 H3867 H3868 H3869 H3870 H3871 H3872 H3873 NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. MPE-27...
  • Page 12 The manufacturer reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © 2005 by LENNOX HEARTH PRODUCTS P/N 850,035M REV.

This manual is also suitable for:

Merit plus mpe-27Merit plus series

Table of Contents