Blower Motor Speed Taps - Daikin Maverick I MPS A03C Installation And Maintenance Manual

Blower Motor Speed Taps

After determining necessary CFM and speed tap data from the
Airflow Performance Data, follow the steps below to change
speeds (see Figure 46 on page 54
1. Remove the blower access panel.
2. Reference Figure 44 for location of the speed tap block
on the blower.
3. Remove the furnace control access panel.
4. Remove the control box cover. See
of the integrated furnace control board.
5. Reference Figure 44 and
location of the red and black wires on the speed tap
block and on the furnace integrated control board to
obtain the speed tap you have chosen.
6. After adjusting the wires accordingly, attach the control
box cover, furnace control access panel and the blower
access panel to the unit.
www.DaikinApplied.com
for examples).
Figure 45 for location
Figure 46 for the proper
Figure 44: Speed Tap Block
Figure 45: Integrated Furnace Control
Integrated Furnace
Control
53
M
aInTenanCe
Speed Tap Block
IM 970-2 • MAVERICK I ROOFTOP