Software Installation - Fujitsu SK-96380-120PMT User Manual

2.4 Software Installation

2.4.1 Installation of Softune Workbench
With the "SK-36380-120PMT" Fujitsu supplies a full working development environment
called Softune Workbench V30L33. To develop own software the Softune Workbench
development environment must be installed first. Follow the instructions for successful
installation of the Softune Workbench.
1) Before starting the installation setup ensure that you are logged in with administrator
or poweruser permissions, otherwise the Softune Workbench installation will fail! Be
aware that Softune Workbench does not support multi-user support. Therefore
install- and user login must be the same.
2) Browse on the starter-kit DVD-ROM into the directory 'Micros DVD 4.0\pdf' and start
the 16STA*.exe.
3) Follow the installation instructions.
4) For the default installation path it is recommended to use c:\Softune16.
5) After the installation is finished. The 16LX/FX Family Softune Workbench can be
started via the Windows "Start" menu.
Figure 2-2: Softune Workbench Start Menu Location
6) When Softune Workbench was started the following window will be shown.
FMEMCU-UG-960001-15
SK-96380-120PMT User Guide
Chapter 2 Installation
Figure 2-3: Softune Workbench V30L33 IDE
- 14 - © Fujitsu Microelectronics Europe GmbH