Show Lisp Site - Cisco Nexus 7000 Series Command Reference Manual

show lisp site

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show lisp site
To display configured Locator/ID Separation Protocol (LISP) sites on a LISP Map-Server, use the show
lisp site command.
Syntax Description EID
EID-prefix
instance-id iid
site-name
vrf vrf-name
detail
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
The show lisp site command is used on a LISP Map-Server to display information related to configured
Usage Guidelines
LISP sites. The displayed output indicates whether a site is actively registered.
This command does not require a license.
This example shows how to display the configured LISP sites on a LISP Map-Server:
Examples
switch# show lisp site
LISP Site Registration Information for VRF "default"
* = truncated IPv6 address
Site Name
cisco-it-xtr
dmm-xtr-1
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-186
show lisp site [{EID | EID-prefix} [[instance-id iid] | site-name] [vrf vrf-name] [detail]
(Optional) Destination endpoint identifier (EID).
(Optional) Instance-id.
(Optional) Displays LISP site information matching this destination EID-prefix.
(Optional) Site name.
(Optional) Specifies thevirtual routing and forwarding (VRF) instance.
(Optional) Specifies the detail of all displayed LISP site information when no
other parameters are used.
Modification
This command was introduced.
Last
Registered
00:00:47
00:00:18
00:00:56
Actively Who last
Registered Registered
yes 172.16.81.170
yes 172.17.81.170
yes 172.30.156.134
Cisco Nexus 7000 Series LISP Commands
EID-prefix
2001:db8:110c::/48
192.168.5.0/24
2001:db8:1200::/48