Starck X Waterwall 10920001 Technical Data Flow rates @ 45 psi Showerhead Handshower Bodysprays Maximum water pressure Recommended water pressure: Recommended hot water temp.: • A check valve is installed in the handshower outlet. • The high temperature limit stop may be reset to comply with local plumbing codes. See page •...
Preparation The Waterwall requires 1/2” NPT male nipples, extend- ing 5/8” outside the surface of the finished wall for the hot and cold water supplies. For proper operation of the thermostatic mixer, the hot supply should be on the left and the cold supply should be on the right.
Page 4
Push the shower arm into place on the Waterwall. Tighten the set screw, using the Allen wrench (included). Hang the shower wall on the top mounting bracket. With a helper holding the panel, attach the hoses to the elbows. Install the bottom retaining screw and tighten with a screwdriver.
Page 5
Set the High Temperature Limit Stop (optional) Remove the thermostatic mixer handle. Carefully remove the retaining clip and the stop ring from the stem. Turn the water on to the handshower. Place a thermom- eter in the water stream. Turn the thermostatic mixer stem until the water coming out is the maximum allowable output temperature (usually 110°...
User Instructions Using the Thermostatic Mixer: turn the handle clockwise to obtain cooler water and counter- clockwise to obtain warmer water. The handle will stop when the water temperature is 100° - this is the safety stop. To obtain water than 100°F, push the safety stop override button and continue turning the handle counter-clockwise.
Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
Page 8
(i) for 1 year, with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products.