Table of Contents
Advertisement
Starck X Waterwall
10920001
Technical Data
Flow rates @ 45 psi
Showerhead
Handshower
Bodysprays
Maximum water pressure
Recommended water pressure:
Recommended hot water temp.:
•
A check valve is installed in the handshower outlet.
•
The high temperature limit stop may be reset to comply with local plumbing codes. See page
5.
•
This unit is listed by IAPMO and is approved for use in Massachusetts.
•
Please save this document as it contains user, maintenance and warranty
information.
*Please know and follow all applicable local codes when setting the temperature on the water heater. In
Massachusetts, the water heater may be set no higher than 112°F.
2
2.5 gpm
2.5 gpm
4.3 gpm
145 psi
40 - 75 psi
120°F - 140°F*
Advertisement
Table of Contents
