4.9. Upper trame
1. Remove cover
2. Remove water out pipe cover
3. Remove Container gasket
Dispensing
comp.
4.10. Name B (Display portion)
1. Remove A prizing open with the minus screwdriver
or pin.
Name B (Display portion)
A
Container gasket
Fig-13
Fig-14
Point when assembling
• Set the dowel of Container comp. between 2 long ribs
(hinged side) of Dispensing spout comp. and assemble it.
• Setting of Container gasket shall be closely attached to the
flange of Container without twisting or distortion.
Point when assembling
• Attach fixing the point A.
• To avoid the mist over of the Crystal liquid portion, press
perimeter especially the part of VIP thermo pot characters
strongly with fingers and stick it firmly.
— 26 —
NC-HU301P, NC-HU401P