Control Unit B Comp - Panasonic NC-HU301P Service Manual

4.6. Control unit B comp. (Display
portion)
1. Disassemble Casing A comp.
2. Take off 2 screws (Refer Fig-10)
3. Disassemble Holder B. (Lift up)
4. Remove Name C.
5. Disconnect lead wire E comp. CN12.
6. Open the hooks of Holder B, and remove Control unit
B comp. Casing A comp.
Points when assembling
• When insert the lead wire E comp. into Control unit B
comp. insert toward the direction shown on figure
(Refer to Fig-10).
Casing A comp.
3.5x12 Bind tapping screw
Holder B
Lead wire E
comp.
— 24 —
NC-HU301P, NC-HU401P
Fig-9
The face with no print.
Control unit B
comp. (Display
portion)
Hook
Fig-10
Name C
Holder B