Part
Assy Motor Removal
(Continued)
10 _ Disassembly and Reassembly
复件 Hudson_Dryer_SM_E.indb 20
figure
1. Disconnect the power supply to the unit.
2. Remove the Panel Control, the Main PCB, the
Cover Top, the Frame Front, the Drum Front and
the Drum.
3. Remove 2 screws from the Duct Connector.
4. Remove 1 Housing Motor.
5. Remove 1 Housing Belt Cut Off Switch.
6. Remove 3 screws from the Motor-Bracket.
Description
2012-4-2 15:20:54