Advertisement
Step 10: Insert end caps
Fig. 11
Step 11: Mount the antenna to a mast
#10 Nuts
Boom brace
Clamp insert
Clamp
insert
Fig. 13
6
Insert two of the plastic end caps in the ends of the
antenna as shown in fi gure 11.
Insert a third plastic end cap in the exposed end of
the boom brace.
Insert the last two end caps on the ends of the
refl ector booms.
Use a rubber mallet to gently tap them into the
ends so that they are secure.
Find the two U-bolts, four 1/4" fl ange nuts, and the
two mast clamp inserts.
Place the mast clamp inserts on the inside of the
mast clamps on the antennas as shown in fi gure
12. Then insert the U-bolts into the mast clamps
Main
boom
and mast clamp inserts. Attach the nuts loosely.
Slide the antenna over the mast and lightly tighten
the two mast clamps. (See fi gures 12 and 13.) The
top side of the antenna is the side with the black
Fig. 12
plastic pieces on it.
Advertisement
